500BPH 330ML 500ML のビール充填機のびん詰めの機械類の製造業者の価格

詳細画像

ビデオ

マシンパラメーター

Main features :

Washing Part

● Except the down framework, the transmission parts and some parts that must be made of special materials. Other parts are all made of stainless steel 304.

● The roller bearing is made of stainless steel, the sealing ring is made of EPDM material, and plastic is made of UMPE.

● The gripper is made of stainless steel, the position where hold the bottleneck is made of food standard rubber;

● Rinsing time can be guaranteed for 4 seconds.

.Filling part

● Filling machine with spring-type mechanical lifting equipment to upgrade glass bottles, large bearing support floundering in the vat and use of guide-rod in the orientation of the structure, there are pre-cover features.

● Long-tube filling valves are adopted, with CO2 fully exchanging with air inside glass bottles,with cylinder liquid level and the back pressure controlled by a variable signal proportional.  Fast, stable, accurate, to be vacuum one at a time

Capping part:

● Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism.

● Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute.

● The capper is equipped with inlet bottle detection switch.

● Centrifugal way of cap arranging is adopted to reduce damage of caps

Remarks: Filler–Capper Monobloc Systems are available