Glass Bottle Beer Filling Machine (3 in 1)

詳細画像

ビデオ

マシンパラメーター

Main features:

Washing Part:

Except the down framework, the transmission parts and some parts that must be made of special materials. Other parts are all made of stainless steel 304.

The roller bearing is made of stainless steel, the sealing ring is made of EPDM material, and plastic is made of UMPE.

The gripper is made of stainless steel, the position where hold the bottleneck is made of food standard rubber;
Rinsing time can be guaranteed for 4 seconds.

Filling part:

Filling machine with spring-type mechanical lifting equipment to upgrade glass bottles, large bearing support floundering in the vat and use of guide-rod in the orientation of the structure, there are pre-cover features.

Long-tube filling valves are adopted, with CO2 fully exchanging with air inside glass bottles, to decrease the rinsing of oxygen effectively. with cylinder liquid level and the back pressure controlled by a variable signal proportional. Fast, stable, accurate, to be vacuum one at a time.

Filler & Capping Machine drive system mainly consists of:

● Filling valve

● Internal isobar filling valve

● Working flowchart

Capping part:

Cap cap-distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism.

Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute.

The capper is equipped with inlet bottle detection switch.

Centrifugal way of cap arranging is adopted to reduce damage of caps.

BXGF SERIES TRIBLOC RINSER FILLER CROWNER

● Suitable to filling: beer bottles filling, crown caps
● Container: 150ml to 1000ml glass bottles
● Filling Capacity: 1,000~12,000 bottler per hour
● Filling Style: isobar filling
● Filling Temperature: 0-4°C （cold filling ）
● Adopted 2 times deoxygenating system
● Crown Caps Capping System
● PLC control, full-automatic working
● Inverter adjustor, filling speed adjustable
● No bottles no filling, clash bottles auto remove, no bottle no capping